×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerDouble skin composite (DSC) construction or Steel/concrete/steel sandwich construction (SCSS) is an innovative and relatively new form of composite construction that can be used in submerged tube tunnels, bridges deck, nuclear structures, liquid and gas containment structures, offshore and onshore structures, military shelters, and shear walls in buildings. The system consists of a plain concrete core sandwiched between two steel plates interconnected together by various types of mechanical shear connectors. The DSC construction perceives advantages that the external steel plates act as both formwork and primary reinforcement, and also as impermeable, blast and impact resistant membranes. The major duty of the shear connectors is to withstand longitudinal shear force and beam/slab separation, while in the bi-steel type where shear connectors are friction welded at both their two ends to two parallel steel plates, the longitudinal and transverse shear force, as well as plate buckling are resisted. The present paper highlights the previous prime researches concerning the subjects of SCSS composite construction, specifically on the conducted tests (push-out tests, tensile, direct shear tests, and bending tests) in which the components of partial interaction (uplift and slip forces) are resisted by various types of shear connectors.
The current study presents the plasma cutting process of 2 mm thickness of AISI 1020 carbon steel. The experiment conducted by taking into the account the effect of two process parameters, including cutting current of 15 and 20 A with cutting speed in range of 500 - 4000 mm/min, on the kerf formation, microstructure and microhardness.The results showed that at low cutting current of 15 A the melting occurred at the workpiece surface without cutting action. Increase the current to 20 A led to full penetration of the workpiece material at low and high cutting speed, with kerf width between 1.26 mm and 1.1 mm for cutting speed of 500 mm/ min and 4000 mm/ min, respectively. The plasma arc cutting speed has a high impact on the heat-affected zone HAZ and microstructure development with coarse grains at the HAZ at low cutting speed of 500 mm/min and constant current of 20A, increase the plasma cutting speed led to decreasing the grain size. The microstructure of the HAZ exhibited a presence of perlite and ferrite with some martensite structure. The highest microhardness of the HAZ of 220.8 HV was found in the sample processed at 20 A current and high cutting speed of 4000 mm/ min. However, the minimum microhardness of the HAZ of 156.7 HV was found in the sample processed at 20 A current and low cutting speed of 500 mm/ min.