×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThis research submits theoretical and experimental realization of shear behavior of RC I-beams with polypropylene fiber with different volume fraction of plastic fiber as additive. The enhance of the sustainability of structural elements through the development of its mechanical performance by adding new materials such as plastic raw materials has become more important in the current period , particularly I- beams that was used in the long spans structure to become more environmentally-friendly. Seven specimens were tested in this study and only the amount of fiber volume fraction was varied. Experimental results showed that the ultimate strengths are increased in range (4.4% to 35.27%) that of control IB-1 for the tested beams containing Polypropylene Fiber Reinforced Concrete (PPFRC) with varied amount percentage of fiber material. Crack arrest mechanism of polypropylene fibers, and compressive strength of concrete increased in range (7.42% to 29.3%) that of plain concrete, and improved the tensile response in range (8.36% to 92.7%) that of plain concrete, limited crack propagation. So, improved behavior was obtained._x000D_ ANSYS 11, Finite Element models software are used to emulate two tested I-beams. 3D - nonlinear solid elements was utilized to model the concrete, while, the steel reinforcement was demonstrated by spar element. It was found that the general practices of the FE models demonstrated acceptable concurrence with perceptions and information from the experimental tests.
This study concerns utilization of nonlinear finite element method for to evaluate the role of longitudinal soffit-bonded CFRP strips in elevating the shear behavior of RC beams without stirrups. All beams cross-sections were of 150 mm breadth and 200 mm depth, the overall length was 1500 mm with clear span 1300 mm. One beam was provided by minimum web reinforcement according to the ACI 318M-14, while the other five were without web reinforcement but externally strengthened by a variety of CFRP-strip combinations consisting of longitudinal soffit-bonded strips. The predictions of a proposed ANSYS (version 14.5) model for six of the test beams including modeling of concrete, steel rebars, CFRP strips and supports and loading steel plates, by SOLID65, LINK180, SHELL41 and SOLID185 elements, respectively, show high agreements with experimental evidence, which stands as a definite witness to the efficiency and reliability of the present numerical model.
Reinforced concrete slab with plastic voids (Bubbled Deck system) is a new type of slabs which has two-dimensional arrangement of voids within the slab that is developed to decrease the slab self-weight while maintaining approximately the same load carrying capacity as compared with the solid slabs. Plastic voided slabs have the ability to reduce concrete amount by about 30 percent and this reduction is so important in terms of cost saving and enhancement the structural performance. In this research paper investigation is carried out to study the shear strength behavior of one-way bubble deck slab using self-compacting reinforced concrete. The experimental program consists of testing thirteen one-way slabs with dimensions of (1700 length, 700 width and 150 thick) mm. One of the tested slabs is a solid slab (without balls) is used as a reference, the remaining twelve bubbled slabs with ball diameter (73, 60) mm are divided into five groups according to the parameters of the experimental work, the parameters of the experimental work include: type of slab (bubble and solid slabs), ball diameter (73, 60) mm, shear reinforcement and spacing between balls. The experimental results showed that the bubbled slabs without shear reinforcement have a decrease in the ultimate load as compared to solid slab by about 3.7% to 14.3% and an increase in the deflection at ultimate load by about 10% to 22%, at the same time the first crack load decreases by about 15.3% to 42.4% as compared to solid slab due to decreases of moment of inertia of bubble slab compared to solid slab. Also, the results showed that the bubbled slabs withe shear reinforcement (multi-leg) have an increase in the ultimate load as compared to solid slab by about 35.4% to 57.3% and an increase in the deflection at ultimate load by about 1% to 15%, at the same time the first crack load decreases by about 2.8% to 27.4% as compared to solid slab.